China DT1-14 Mini Drilling Jumbo Suppliers - High-Efficiency Narrow Tunnel Machine from Reliable Factory
Product Introduction
Varies of drifters can be selected to install in the drilling jumbo. Except chassis, this machine has almost the same configuration with wheel type drilling jumbo. The applied working section is 2.2×2.0m and 4.65m×3.75m, the gradeability is less than 15°, the tramming speed is 2.4km/h.
Features
Hydraulic system
- It adopts direct drilling control system and manual four-way handle to control the translation of the big arm, with anti-sticking function and stepwise pressurization system to ensure more stable work and less shank consumption;
- Oil tank level higher than pump can avoid cavitation of oil tank;
- Hydraulic turbine gear box and spiral oil cylinder can form cross joint, which makes the rig can drilling holes in tunnel face, top slope, side slope and bottom slope without limitation;
- Multiple filtration system ensures cleanliness of oil, decreases malfunctions;
- Reasonable pump flowrate and high efficiency water cooler can maintain good oil temperature after machine’s heavy duty work.
Translational Drilling Boom
- The mechanical translational drilling boom can make the feeding beam to keep parallel function, to make direct, quick, accurate location; On the other hand, the boom can make sure drilling holes to be parallel with each other, no need of manual calibration.
- The arm adopts rectangular section design, make it more stable of the drilling boom. The rotation motor installed on the arm can make the feeding system rotates ±180°.
Cable reel
- The special designed cable reel can realize flexible collection and laying cable, higher safety and automatic level.
Applications
The DT1-14 is used in underground mine of narrow tunnels.
Parameters
| Category | Item | Technical Parameters |
|---|---|---|
| Complete Machine | Section area(B×H) | 2300×2300~4300×3500mm |
| Drilling hole diameter | Φ38~76mm | |
| Hole depth | 2100/2700mm | |
| Total weight | 7900kg | |
| Rock Drill | Rock drill | W10 |
| Propeller rotary hydraulic reducer | ±180° | |
| Propeller screw cylinder | ±90° | |
| Propulsion compensation travel | 1500mm | |
| Chassis | Tramming type | Crawler |
| Driving Device | Hydraulic motor, speed reducer | |
| Turning Radius(Running) | ＞6m | |
| Tramming speed | 1.8km/h | |
| Gradeability | ＜14° | |
| Features | Hydraulic motor drive | |
| Air supply system | Air compressor type | Piston |
| Flowrate | 200L/min | |
| Motor power | 1.1kW | |
| Working pressure | 0.7Mpa | |
| Water supply system | Booster water pump | Centrifugal |
| Flowrate | 30L/min | |
| Motor power | 1.1kW | |
| Working pressure | 0.7Mpa | |
| Electrical system | Motor power of pump station | 37kW |
| Voltage | 380/660V 660/1140V | |
| Motor rotation speed | 1480r/min | |
| Tramming lights | 2×9W | |
| Working lights | 2×100W |
Drawings
Overall Dimension
Frequently Asked Questions
1. What are your prices?
Our prices are subject to model.
2. Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
3. What is the average lead time?
The average lead time would be 3 months after advance payment.
4. What kinds of payment methods do you accept?
Negotiable.
5. What is the working section area and gradeability of the DT1-14?
The applied working section is 2.2×2.0m and 4.65m×3.75m. The gradeability of the machine is less than 15° (with crawler gradeability less than 14° as per specifications).
6. What are the drilling hole diameter and hole depth capabilities?
The DT1-14 drilling jumbo supports a drilling hole diameter of Φ38 to 76mm, and a hole depth of 2100mm or 2700mm.